Cable winding options for electric winches
ELECTRIC WINCHES x OPTIONAL EQUIPMENT x Cable winding options TO KNOW Winding cable must always be carried out under tension in lifting counterweights are mandatory see p 92 Grooved drum Rope press roller Facilitates the correct winding of the rope on the first layer Essential for installing a two-way system See p 94-97 Allows an orderly winding of the rope on the drum Essential complement to the grooved drum used on a single layer and in the case where the rope is not permanently tensioned no load winding in traction Not recommended if the rope is wound on several layers Mandatory with a two-way system Releasable drum Multi cables drum Very useful for manual unwinding of the rope over a long distance pulling applications only Allows lifting a load with several ropes lifting several loads or making a two-way system Rope slack switch This devise automatically stops the winch when unwinding when the wire rope is not tensioned For example when lowering and the loads meets an obstacle or in traction Drum length on request Drum with additional flange Counterweight Encoders Allows several layers to be wound with 2 ropes Used to maintain a minimum tension in the rope during its use Encoder offering multiple possibilities synchronization altimetry measurement ELECTRIC WINCHES 66